ARKIMAX MARBLE PRO is a high-adhesion, high-workability powder cementitious adhesive specially formulated for the professional installation of marble, quarry stone, and natural stone on interior or exterior floors and walls. Its improved formula provides longer open time, mechanical strength, and security for medium- and high-absorption tiles.
High-performance Portland cement, selected mineral fillers with controlled granulometry, and technical additives that improve its adhesion, plasticity, and strength.
Special for marble, natural stone, quarry and ceramic tiles
Ideal for walls and floors, indoors and outdoors
High adhesion and long-lasting workability
Good resistance to shear and compression
Extended open time to facilitate adjustments
Recommended application thickness: 3 to 10 mm
Compatible with double gluing on delicate pieces
Cured cementitious mortars
Structural concrete
Cement-sand plasters
Firm, clean, dry and contaminant-free surfaces
Not suitable for wood, metals, plastic or moving surfaces
Support Preparation:
Make sure the surface is structurally sound, dry, and free of dust, grease, or paint. Pre-level if necessary.
Mix:
Add 5.0 to 5.5 liters of clean water per 25 kg bag. Mix with a mechanical mixer until you obtain a thick, homogeneous paste. Let stand for 5-10 minutes and remix without adding more water.
Application:
Spread over the surface with the flat side of the trowel and then score with the notched side. Apply to areas no larger than 1 m². Double-stick for heavy or low-absorption pieces. Do not adjust after 20 minutes.
Cured:
Avoid traffic for at least 36 hours. Cap after 36 to 48 hours.